immogum - all-purpose adhesive

IMMOGUM:

• is solvent-free
• is water-free (no danger of water absorption and therefore shortened adhesive force)
• is not susceptible for cracks
• does not shrink
• contains no aromatic compounds
• adheres even to wet surfaces
• adheres to oily / greasy surfaces

Product description: IMMOGUM is a spur polymer based adhesive for gluing plastic foils and vapour barriers in the building industry.

The product is free of isocyanates, silicones and solvents. After application the adhesive cures with atmospheric moisture to form a durable pressure sensitive rubber mass.

Applications: Designed for the adhesion of plastic foils like PE, PBC, EPDM, DPC, aluminium foil, carton, Kraft paper and non-woven on stone, concrete, plaster, metal and wood.

Limitations: Among others not recommended for locations subject to continuous water emersion. IMMOGUM develops its optimum adhesion after two 2 till three days at room temperature.

Surface preparation and finishing: Surfaces must be clean and sound. Apply the adhesive on the substrate as a continuous bead of approximately 8mm thickness. Leave the adhesive to cure for 30 minutes for good initial adhesion. Then put the foil into place and press lightly into the bead. Do not press!

Available colours: Green. Other colours on request. Translucent (not transparent)

Packaging: Cartridges of 310ml